Camo Dip Kit

 instructional DVD - 90 minute video included


Camo Dip Kit is a quick and easy, do-it-yourself kit that lets you apply a variety of the world's most popular camouflage patterns to anything you like. Our patented water transfer process, also called hydrographics, is a way to transfer an image to a 3-D surface. Far easier than offset printing, vinyl decals, and similar covering methods and at a fraction of the cost The Camo Dip Kit process can be applied to the surface of materials such as metals, wood, plastic, stone, bakelite, ceramic, etc.

Buy Your Kit Online Today!

Camouflage Dip Kit 



How does the Hydro Dip Kit Work?

Products are decorated using a print, which resides on a thin base of water-soluble film. The printed film is placed on the surface of the water, and the base begins to dissolve. A patented activator chemical is sprayed over the film causing the ink to remain floating in an oil-like state on top of the water. Next the properly prepared part is immersed into the water, and the upward pressure of the water causes the ink to wrap around and adhere to the item. After the entire item has been immersed, it is removed from the water, cleaned and then coated with a clear coat.

Included in the kit is a link to a set of video instructions that walk you through all the st1 x 4 oz aerosol can of activator. Our Camo Dip Kit Includes: Hydrographic / Water Transfer film. Our Large Kit comes with 1 square meter (20 inches wide by 6.5 feet long) of top quality, hydrographic film - enough material to dip an entire rifle with scope and rings, a car console with accessories, 2- 3 hand guns, you name it!


1 Can of Hydrographic Base Coat Paint - Incredibly durable base coat made specifically for the water transfer process. 1 Can of Matte Finish – DEET and solvent resistant, hard-as-nails clear coat that will stand up to whatever you can dish out! 1 Bottle of Hardener - Used by both the paint and the matte finish. When mixed with the paint and clear coat, this will give you a rock hard finish that no aerosol "rattle can" can ever provide! 1 Can of Film Activator - this "releases" the print from the film and onto your object. 1 Hydraphics Sprayer System – Used to apply your paint, clear coat and film activator. It is the perfect cross between a commercial spray gun and a can of cheap, aerosol spray paint. As easy to use as an aerosol! 2 Pairs of Latex Gloves and an instructional DVD - 90 minute video - broken up into over 40 chapters for easy navigation through the entire process! A very detailed walk-through of a complete dip - from disassembly and prep, through the painting, dipping, touch-ups, finishing and reassembly. In the process, we will show you techniques and tips used by professional dippers. 1 Set of Thorough, Written Directions.


Buy Your Kit Online Today!